Emprex 18X DVD-ROM DRIVE User Manual download pdf (Page 7)

INSTALLATION

Hardware Installation

To connect this drive to your PC, you will need an SATA connector for the

SATA drive.

1. With the power to your PC disconnected, remove the PC’s top cover.

2. Insert the drive into one of the free 5¼" bays available for disk drives

and secure it with screws to your PC.

3. Connect the 7-pin Signal & 15-pin Power Segment Key cable from

your hard disk to the back of the DVD drive.

4. If you have a sound card that can be connected to this drive, you can also

connect Audio-Out of the drive to Audio-In of the sound card with a 4-pin

audio cable.

 Please make sure to connect Pin 1 from Audio-Out of the Writer to Pin

1 from Audio-In of the sound card.

5. Reinstall the casing on your PC, and reconnect the power supply.

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

No comments

Emprex 18X DVD-ROM DRIVE User Manual Page 7