Emprex 16x DVD R/RW Writer User Manual download pdf (Page 8)

DVD±R/RW Writer

Hardware Installation

1. Turn off the power to the computer system.

2. Disconnect all cables from the back of your computer, and then

remove the cover from the computer.

3. Insert the writer into one of the vacant 5.25" drive bays and secure

it with screws to your PC.

 In order to prevent interference between the writer and the computer,

please mount the writer using all four mounting screws.

4. Connect the 40-pin IDE cable from one of the IDE ports on the

mainboard to the 40-pin connector of your writer. Also, connect the

power

supply cable to the back of the writer.

 Make sure to align and connect the red-edge of the IDE Cable to Pin

1 on the drive.

5. If you have a sound card that can be connected to this writer, you

can connect the drive (as Audio-out) and the sound card (as Audio-

in) with a 4-pin audio cable.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

No comments

Emprex 16x DVD R/RW Writer User Manual Page 8